Cekta Bin
Cekta Bin
Designer: Stéphane Chapelet
Contemporary Waste Collection with a Clean Architectural Profile
Cekta is a commercial trash receptacle designed by Stéphane Chapelet for indoor and outdoor public environments.
Its simple geometric body gives the receptacle a contemporary appearance that can coordinate with modern architecture without becoming visually dominant.
The product is designed for convenient waste collection, routine servicing, and permanent installation in commercial and public spaces.
Recommended Applications
- Public parks
- Streetscapes
- University campuses
- Shopping centers
- Corporate developments
- Hospitality environments
- Residential communities
- Cultural facilities
- Transit areas
Materials and Finishes
Cekta is manufactured from formed steel and can be supplied with an exterior protective treatment and polyester powder-coated finish.
Custom RAL colors may be selected to coordinate the receptacle with benches, planters, bicycle racks, and other site furnishings.
Installation
The receptacle should be permanently fixed to a suitable substrate according to the approved technical drawing.
Specification Text
Provide LAB23 Cekta commercial trash receptacle designed by Stéphane Chapelet, manufactured from formed steel with removable internal waste container. Provide selected exterior protective treatment, powder-coated finish, servicing system, lock, and ground-fixing provisions in accordance with approved shop drawings.
Frequently Asked Questions
Gallery
Cekta
The Cekta Bin is made in steel sheet. The structure is made in steel sheet of 15/10 and 30/10 thickness and the base is provided with a plate of 50/10 thickness with 4 holes of 11 mm diam. for the fixing to the ground through specific bolts (not provided). Inside there is an element in galvanized steel for the insertion of waste bag. To empty the bin, there is a door with a triangular key lock placed on the front part.
This product is entirely made in Italy from steel subjected to an electrolytic galvanising cycle and subsequently painted with PP powders with Ral colour of your choice.
The galvanized steel used is steel EN10346DX51D+Z and, unless otherwise stated, is not painted.
The Cekta Bin is made in steel sheet. The structure is made in steel sheet of 15/10 and 30/10 thickness and the base is provided with a plate of 50/10 thickness with 4 holes of 11 mm diam. for the fixing to the ground through specific bolts (not provided). Inside there is an element in galvanized steel for the insertion of waste bag. To empty the bin, there is a door with a triangular key lock placed on the front part.
This product is entirely made in Italy from steel subjected to an electrolytic galvanising cycle and subsequently painted with PP powders with Ral colour of your choice.
The galvanized steel used is steel EN10346DX51D+Z and, unless otherwise stated, is not painted.
