Leaves
Leaves
Designer: LAB23
Leaves / Leaves 2 — premium planters by LAB23.
Models & Variations
Leaves
The square-shaped planter LEAVES is made in steel 20/10 thickness. The 2 sides of the planter are characterized by a laser-cut leave-shaped pattern. Behind the carving, there’s a plate that can have a different colour so that it stands out. On the bottom of the planter 2 drain pipes, made in tubular steel, section 16X2 mm, H 50 mm, are welded. On the feet of the planter there are 4 holes 8 mm diam. for the fixing to the ground through specific bolts (not provided).
This product is entirely made in Italy from steel subjected to an electrolytic galvanising cycle and subsequently painted with PP powders with Ral colour of your choice.
As an alternative to steel EN10111DD11, the production in corten is also available, on demand. In this case the material is treated with a specific oxidation process.
The square-shaped planter LEAVES is made in steel 20/10 thickness. The 2 sides of the planter are characterized by a laser-cut leave-shaped pattern. Behind the carving, there’s a plate that can have a different colour so that it stands out. On the bottom of the planter 2 drain pipes, made in tubular steel, section 16X2 mm, H 50 mm, are welded. On the feet of the planter there are 4 holes 8 mm diam. for the fixing to the ground through specific bolts (not provided).
This product is entirely made in Italy from steel subjected to an electrolytic galvanising cycle and subsequently painted with PP powders with Ral colour of your choice.
As an alternative to steel EN10111DD11, the production in corten is also available, on demand. In this case the material is treated with a specific oxidation process.
Leaves 2
The rectangular-shaped planter LEAVES 2 is made in steel 20/10 thickness. The 2 sides of the planter are characterized by a laser-cut leave-shaped pattern. Behind the carving, there’s a plate that can have a different colour so that it stands out. On the bottom of the planter 2 drain pipes, made in tubular steel, section 16X2 mm, H 50 mm, are welded. On the feet of the planter there are 4 holes 8 mm diam. for the fixing to the ground through specific bolts (not provided).
This product is entirely made in Italy from steel subjected to an electrolytic galvanising cycle and subsequently painted with PP powders with Ral colour of your choice.
As an alternative to steel EN10111DD11, the production in corten is also available, on demand. In this case the material is treated with a specific oxidation process.
The rectangular-shaped planter LEAVES 2 is made in steel 20/10 thickness. The 2 sides of the planter are characterized by a laser-cut leave-shaped pattern. Behind the carving, there’s a plate that can have a different colour so that it stands out. On the bottom of the planter 2 drain pipes, made in tubular steel, section 16X2 mm, H 50 mm, are welded. On the feet of the planter there are 4 holes 8 mm diam. for the fixing to the ground through specific bolts (not provided).
This product is entirely made in Italy from steel subjected to an electrolytic galvanising cycle and subsequently painted with PP powders with Ral colour of your choice.
As an alternative to steel EN10111DD11, the production in corten is also available, on demand. In this case the material is treated with a specific oxidation process.