Morphoscape
Morphoscape
Designer: Karim Rashid
Morphoscape Lounge / Morphoscape Bench — premium benches by LAB23.
Models & Variations
Morphoscape
Morphoscape Lounge
Morphoscape Lounge is a sofa made of 3 elements in steel, 30/10 and 50/10 thickness.Each element can have a different colour to have a varied, colourful composition.The standard combination comes with 2 modules KRK_BE201, placed next to the module KRK_BE101.
Standard combination weight: 131 kg
The main element of the sofa Morphoscape Lounge (KRK_BE101)
KRK_BE101 is the main element of the Morphoscape Lounge, but can be used on its own as well. It is made of a steel sheet, which is laser-cut, bent and welded. The structure is made of a sheet, 30/10 thickness, with the typical Kaleidoscope carving, shaping the seat and the backrest. The two elements on the side, 50/10 thickness, are welded to the structure . On the lower part there are 2 plates, with 2 holes (11 mm diam.) For the fixing to the ground through specific bolts (not provided).
Steel EN10111DD11 is used for the realization of this product made in Italy and all the elements in this material, after all the different stages (cutting, bending, welding), are treated with electrogalvanizing according to the UNI regulations and are later polyester powder-coated with RAL colours at choice.
Weight: 53 kg
The side element of the Morphoscape Lounge sofa (KRK_BE201)
KRK_BE201 is the side element of the Morphoscape Lounge. It is made in a steel sheet, which is laser-cut, bent and welded. The structure is made of a sheet, 30/10 thickness, with the typical Kaleidoscope carving, shaping the seat and the angular backrest. The load-bearing structure is made in steel sheet, 50/10 thickness. On the lower part there are 3 plates, with 2 holes (11 mm diam.) For the fixing to the ground through specific bolts (not provided).
This product is entirely made in Italy from steel subjected to an electrolytic galvanising cycle and subsequently painted with PP powders with Ral colour of your choice.
Morphoscape Lounge is a sofa made of 3 elements in steel, 30/10 and 50/10 thickness.Each element can have a different colour to have a varied, colourful composition.The standard combination comes with 2 modules KRK_BE201, placed next to the module KRK_BE101.
Standard combination weight: 131 kg
The main element of the sofa Morphoscape Lounge (KRK_BE101)
KRK_BE101 is the main element of the Morphoscape Lounge, but can be used on its own as well. It is made of a steel sheet, which is laser-cut, bent and welded. The structure is made of a sheet, 30/10 thickness, with the typical Kaleidoscope carving, shaping the seat and the backrest. The two elements on the side, 50/10 thickness, are welded to the structure . On the lower part there are 2 plates, with 2 holes (11 mm diam.) For the fixing to the ground through specific bolts (not provided).
Steel EN10111DD11 is used for the realization of this product made in Italy and all the elements in this material, after all the different stages (cutting, bending, welding), are treated with electrogalvanizing according to the UNI regulations and are later polyester powder-coated with RAL colours at choice.
Weight: 53 kg
The side element of the Morphoscape Lounge sofa (KRK_BE201)
KRK_BE201 is the side element of the Morphoscape Lounge. It is made in a steel sheet, which is laser-cut, bent and welded. The structure is made of a sheet, 30/10 thickness, with the typical Kaleidoscope carving, shaping the seat and the angular backrest. The load-bearing structure is made in steel sheet, 50/10 thickness. On the lower part there are 3 plates, with 2 holes (11 mm diam.) For the fixing to the ground through specific bolts (not provided).
This product is entirely made in Italy from steel subjected to an electrolytic galvanising cycle and subsequently painted with PP powders with Ral colour of your choice.
Morphoscape Bench
Morphoscape Bench is made of 3 elements welded together, made in steel sheet, 80/10 thickness. On the lower part there are 4 holes (11 mm diam.) For the fixing to the ground through specific bolts (not provided).
Steel EN10111DD11 is used for the realization of this product made in Italy and all the elements in this material, after all the different stages (cutting, bending, welding), are treated with electrogalvanizing according to the UNI regulations and are later polyester powder-coated with RAL colours at choice.
Morphoscape Bench is made of 3 elements welded together, made in steel sheet, 80/10 thickness. On the lower part there are 4 holes (11 mm diam.) For the fixing to the ground through specific bolts (not provided).
Steel EN10111DD11 is used for the realization of this product made in Italy and all the elements in this material, after all the different stages (cutting, bending, welding), are treated with electrogalvanizing according to the UNI regulations and are later polyester powder-coated with RAL colours at choice.