Time
Time
Designer: LAB23
Bicycle Parking with a Warm Material Detail
Time is a single-position commercial bike rack designed by Hangar Design Group.
Its tapered steel body rises from a square base and is finished at the top with a hardwood element. A laser-cut lower plate serves both as structural support and as a guide for positioning the bicycle wheel.
The combination of steel and wood gives Time a more furniture-like appearance than a conventional utilitarian rack.
Construction
- Steel body approximately 0.24 in / 6 mm thick
- Square hardwood top
- Laser-cut steel wheel guide
- Two base fixing holes
Published Dimensions
- Base: approximately 7.9 × 7.9 in / 200 × 200 mm
- Height: approximately 47.2 in / 1,200 mm
- Capacity: one bicycle
Materials
- Galvanized and powder-coated steel
- Iroko or Okoumé wood treated with water-repellent, UV-resistant oils
Specification Text
Provide LAB23 Time single-position bicycle rack designed by Hangar Design Group, consisting of a formed 6 mm steel body, square hardwood top, and integrated laser-cut wheel-positioning rail. Provide selected wood species, powder-coated finish, and surface anchoring in accordance with approved drawings.
Frequently Asked Questions
Gallery
Time
The bike rack TIME (1 bike) is made in steel 60/10 thickness. It is cone-shaped with a square base made in exotic hardwood, which is fixed to the structure on the upper part through specific screws. The structure is supported on the lower part by a specific laser-cut sheet 60/10 thickness, which also serves as a rail for the placement of the wheels of the bike. TIME can be fixed to the ground through specific bolts (not provided) through 2 holes 10 mm diam.
This product is entirely made in Italy from steel subjected to an electrolytic galvanising cycle and subsequently painted with PP powders with Ral colour of your choice.
The wood used is either Iroko or Okume, treated with natural, water-repellent, UV ray resistant oils.
The bike rack TIME (1 bike) is made in steel 60/10 thickness. It is cone-shaped with a square base made in exotic hardwood, which is fixed to the structure on the upper part through specific screws. The structure is supported on the lower part by a specific laser-cut sheet 60/10 thickness, which also serves as a rail for the placement of the wheels of the bike. TIME can be fixed to the ground through specific bolts (not provided) through 2 holes 10 mm diam.
This product is entirely made in Italy from steel subjected to an electrolytic galvanising cycle and subsequently painted with PP powders with Ral colour of your choice.
The wood used is either Iroko or Okume, treated with natural, water-repellent, UV ray resistant oils.